Usb And Sd Card Cover Gr/Gm10 - Leica GR10 Operational Manual

USB and SD Card Cover GR/GM10

USB port and SD card slot
The GR/GM10 has a USB port and an SD card slot.
USB client port
The USB port can be used:
•
to connect the GR/GM10 to a computer and access the Web interface and FTP server.
•
connect the GR/GM10 to a CS10/CS15 field controller and access the Web interface.
SD card slot
Data is stored on a removable SD card. For more information on how to work with the SD card, refer to Working with the
Memory Device.
If no SD card is inserted, data storage is not possible.
Unplugging connection cables or removing the SD card during data logging or streaming can cause loss of
data. It is recommended to switch off the instrument before removing the SD card.
While other SD cards can be used, Leica Geosystems recommends only using Leica SD cards. Leica
Geosystems is not responsible for data loss or any other error that can occur while using a non-Leica card.
SD cards can directly be used in the Leica USB Card Reader (767895 MCR7). Other computer card drivers
can require an adaptor.
If formatting the SD card is necessary, we highly recommend to format the SD card on the instrument. Refer
to the How to reset the receiver settings - Step-by-step format the SD card for detailed instructions.
SD card capacity
•
Maximum supported capacity: 32 GB.
a. USB port
b. SD card slot
4: User Interface
43