Receiver Setup: Language Management - Leica GR10 Operational Manual

Receiver setup: Language management

Background information
The language management page allows selecting which language will be used on the receiver. Only one language can be
chosen at a time and the selection is valid for all users.
The default language is English. English will always be used if the provided language file does not contain a translated token.
For more information on translating please contact your local Leica Geosystems Dealer/Distributor in the country where you
bought your product.
Setting Descriptions
The table below describes the fields in the Languages tab.
Setting
Language
Code
Release date
Version
Delete
Install
Upload new language
file
Related topics
Receiver setup: File upload
Description
Lists all language files loaded onto the receivers SD card.
A 2 letter abbreviation for the language file.
The release date of the language file. The English language file is always
released with the firmware file. No release date is listed for English.
The version number.
If you install a language version that does not match the
installed firmware version, web interface content may
become unusable.
If a language file other than English is active during
firmware upgrade, the language file is deleted and the
receiver is set to using English. After the firmware
upgrade, the language file for the new release firmware
must be installed manually.
Select to delete the language file from the SD card.
The default English language file cannot be deleted.
Press to install the language file.
Press to upload a new language file from the computer to the receiver. Opens
the File upload page.
6: Context sensitive help
285