Leica Surveying Controllers Cs10/Cs15 - Leica GR10 Operational Manual

Leica surveying controllers CS10/CS15

The CS10 and CS15 controllers can be used to configure a GR/GM Series instrument. The following step-by-step guide
explains how to access the web interface of the GR/GM Series instrument using a CS10 or CS15.
Access via USB connection
Step Description
1 Power on the GR/GM Series instrument.
2 Power on the CS10/CS15.
3 Connect the mini USB connector of the USB cable (article number xxx) with the GR/GM Series instrument.
4
Connect the standard USB connector of the USB cable with the CS10/CS15.
5 On the CS10/CS15 go to Start and open the Internet Explorer.
6 Type in 192.168.254.2 in the URL line of the Internet Explorer.
Access via Bluetooth connection
Step Description
1
Power on the GR25 instrument.
2 Power on the CS10/CS15.
3 On the GR25 screen, go to Configuration / Network Config and scroll down to Bluetooth.
4 Press the left and right button to enable the Bluetooth device on the GR25.
5 On the CS10/CS15 exit the SmartWorx application, if installed, to show the Windows desk-top.
6 Go to Start / Settings / Network and Dial-up Connections.
7 Tab the BTPAN1 icon and hold until the menu comes up. Select Enable.
8 Press the Bluetooth icon in the lower right corner and select Show.
9
Press the search icon to start searching for Bluetooth devices.
10 Once the GR25 is detected, it is shown with its hostname. Tab the GR25 icon and select Pair. The default Pin is
0000.
11 Tab the GR25 icon again and select open. You will see a serial port connection and a personal area network.
Double click the personal area network.
You receive a confirmation message that the Connection was successful and the Bluetooth LED
GR25 turns blue.
12 Press OK in the Confirmation message and close the Bluetooth Manager,
13 On the CS10/CS15 go to Start and open the Internet Explorer.
14 Type in 192.168.253.2 in the URL line of the Internet Explorer.
11: External Devices
on the
335