Leica GR10 Operational Manual page 323

Initializing the measurement is mainly useful for special tracking applications. E.g. if unhealthy satellites are forced to healthy
and then set back to automatic health setting, it is recommended to initialize the measurement. Satellites with bad health may
transmit incorrect almanacs and ephemeris.
Step Description
1
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
2 Go to the Receiver setup / Tools page
3
Press the Initialize measurement engine
The receiver will stop tracking satellites and lose the navigated position. It takes several minutes for the
receiver to start tracking again and regain a navigated position.
icon to delete the almanac and ephemeris.
9: How to
321