Gnss Management: Site Name And Coordinates - Leica GR10 Operational Manual

GNSS management: Site name and coordinates

Background Information
Site name and coordinates is used to enter the reference station information that will be used for real time correction messages
and raw data logging.
Changing the site name and/or coordinates interrupts logging and streaming. If any of these settings are
changed when a logging session is active then the current files will be finalized and new file(s) will start to be
logged.
Setting Descriptions
The table below describes the settings that can be configured on the Site name and coordinates page.
Naming Description
Site name Enter the name of the site. This is a unique identifier for the location of the receiver. The site
name field can be left blank.
Site code Enter a four character site code as an identifier for the instrument. The code is used for the first
four characters of the raw data (MDB and RINEX) file names.
Marker name
Enter a marker name.
•
The maximum number of characters is 16.
•
ASCII characters
Only certain
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
•
The maximum number of characters is 4.
•
ASCII characters
Only certain
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ (hyphen and underscore are also allowed)
•
The marker name is used to occupy the equivalent entry in the RINEX header when
creating RINEX files for this site.
•
If no Marker Name is entered then it will default to the Site Name. If no site name is
entered, the marker name field in the RINEX header will stay empty.
•
The maximum number of characters is 60.
•
ASCII characters
Only certain
are allowed.
are allowed.
are allowed.
6: Context sensitive help
131