Leica GR10 Operational Manual page 340

Operational Manual (Online Help)
Step Description
The SIM card is inserted into a slot on the bottom of the GFU housing.
1
Take the SIM card, a coin and a pen.
2 Locate the SIM card screw, that covers the SIM card slot, on the bottom of the GFU housing.
3 Insert the coin into the groove of the SIM card screw.
4 Turn the coin anticlockwise to loosen the SIM card screw.
5 Remove the SIM card screw from the housing.
6 Using the pen, press the small button of the SIM card slot to eject the SIM card holder.
7 Take the SIM card holder out of the housing.
8 Put the SIM card into the SIM card holder, the chip facing up.
9 Insert the SIM card holder into the SIM card slot, the chip facing the connectors inside the slot.
10 Place the SIM card screw back on the housing.
11 Insert the coin into the groove of the SIM card screw.
12 Turn the coin clockwise to tighten the SIM card screw.
LED indicators
Description of the LED's
IF the
Warning LED
Data transfer LED
Signal strength LED
338
a. Warning LED, available for Satelline SAS
b. Data transfer LED
c. Signal strength LED
d. Power LED
on
GFU14 with Satelline
3AS
any device
GFU19 (US),
is
red
off
green or
flashing green
red
THEN
the device is in the configuration
mode controlled from the PC via
cable.
data is not being transferred.
data is being transferred.
device is on, not registered on the