Leica GR10 Operational Manual page 131

SD Card
Total size
Memory left
External USB drive
Total size
Memory left
Receiver internal
temperature
Current temperature
All time high
All time low
CPU load
Current CPU usage
CPU load history
Diagram
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Description
The total storage space available on the SD card.
The available storage space remaining on the SD card.
Description
The total storage space available on the external USB drive.
The available storage space remaining on the external USB drive.
Description
Shows the current temperature of the processor board in the receiver [units = degrees
Celsius]. This information will be updated every 5 seconds.
Shows the maximum temperature since the last reset of the all-time high/low value. The
update rate of this value is 5 seconds. This value will be kept after a reboot of the receiver if
the temperature at reboot does not exceed it.
Shows the minimum temperature since the last reset of the all-time high/low value. The update
rate of this value is 5 seconds. This value will be kept after a reboot of the receiver if the
temperature at reboot does not fall below it.
Description
Displays the current CPU load.
Description
The CPU load history diagram shows the CPU load for the last 10 minutes. The graph is
visible after a few minutes and is only shown when this Status page is accessed. If you leave
the status page, all information in the graph is deleted.
6: Context sensitive help
129