Leica GR10 Operational Manual page 172

Operational Manual (Online Help)
D-Series NS-XX/DMG2 default communication settings
Communication setting
Port name
Baud rate
Parity
Data bits
Stop bit
Flow control
The D-Series tilt sensor must be configured to use 9600 Baud, otherwise the GR/GM receiver will not be able
to connect to the tilt sensor.
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.
170
Default setting
Serial Port (P1).
9600
Even
8
1
No handshake. The handshake used between the receiver and the tilt device.
to continue to the next wizard step.