Leica GR10 Operational Manual page 53

Edit a setting
3 Press OK to confirm or Cancel to abort.
Step Description
1 Navigate to the setting using the Enter button to open the page and the
up/down buttons to select the setting.
2 Press Enter to activate the edit mode. Note that the left most character is
underlined.
3
Use the up/down button to scroll through all available numbers/characters,
hold the key to scroll faster.
Press the left or right button to switch to the next character to edit
OR
Press the left or right button for 2s to insert a character to the left or right.
4 On the furthest left or right character, use the left or right button to add an
additional character at the beginning or end.
5 Press Enter to finish the entry.
->
4: User Interface
51