Remote Access Wizard: Configure Tcp/Ip Server - Leica GR10 Operational Manual

Remote access wizard: Configure TCP/IP server

Background Information
The receiver works as a TCP server, allowing TCP clients to connect to the receiver's ports, configure the receiver settings and
receive LB2 data.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP server page.
Setting
TCP/IP port
Data receive time out
Limit access range
Press to go back to the previous wizard step. Press
Press to cancel and return to Spider and remote access: Overview .
Description
Enter the TCP/IP port of the receiver for Leica GNSS Spider or other OWI based software to
connect to.
If for a Spider / OWI connection no OWI requests are received within the specified time, the
connection will be automatically reinitialized. This will help keep the communication channel
up and running, especially when using an instable IP network environment, e.g. mobile
networks.
If the timeout value is set to 0 (zero), there will be no automatic reinitialization (default
setting).
Select the range of IP addresses which are authorized to access the receiver.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
to continue to the next wizard step.
6: Context sensitive help
239