Leica GR10 Operational Manual page 227

IP address
Subnet mask
Default gateway
DNS settings
Preferred DNS server
Alternate DNS server
Renew DHCP
lease
WEP Encryption
WEP encryption can be used in 2 versions: Open and Shared. In both cases the data is encrypted.
•
Open
Everyone can connect to the access point but only if the right encryption key is provided, data can be exchanged. Hence,
For more information on how to access the web interface in a non-
DHCP network, please refer to Setup in a non - DHCP network.
Enter the Internet protocol address of the receiver.
This field can only be edited if the Obtain an IP address automatically field is
disabled.
The IP address is a 32 bit number which must be obtained from the network
administrator or the Internet service provider. The format of the IP address is
aaa.bbb.ccc.ddd where aaa is a value ranging from 001 to 223 and bbb, ccc and ddd
are values ranging from 000 to 255.
Enter the subnet mask assigned to the subnet the receiver is connected to.
A subnet mask allows IP networks to be subdivided for security and performance
purposes.
This field can only be edited if the Obtain an IP address automatically field is
disabled.
Enter the Gateway. This is the IP address of a local default IP router on the same
network. It is used to forward traffic to destinations beyond the local network.
This field can only be edited if the Obtain an IP address automatically field is
disabled.
A gateway is the connection or interchange point that connects separate IP networks.
For example, a Local Area Network may need a gateway to connect it to the Internet.
The format of the gateway is aaa.bbb.ccc.ddd, where aaa is a value ranging from 001
to 223 and bbb, ccc and ddd are values ranging from 000 to 255.
Description
Enter the DNS (Domain Name System) server IP address to be used for resolving host
names.
This field can only be edited if the Obtain an IP address automatically field is
disabled.
Enter a backup DNS (Domain Name System) server IP address to be used for
resolving host names.
This field can only be edited if the Obtain an IP address automatically field is
disabled.
Press to trigger a renewed IP address from the DHCP server.
This option is only available when the Obtain IP address automatically check box is
active.
6: Context sensitive help
225