Receiver Setup: Overview - Leica GR10 Operational Manual

Receiver setup

Receiver Setup: Overview

Configure all receiver related settings such as network connections, FTP push locations and the user management. Or use the
tools to upgrade the receiver firmware, add new option keys or switch to your preferred language.
Menu option
Network Connections
Access Management
Spider and remote access
Ntrip Caster
Web server
DynDNS
FTP server
Device management
Event log
Power management
SNMP
Tools
Description
•
Configure the receiver IP and DNS settings to allow access via the
Internet.
•
Selected devices such as mobile phones, modems and radios that can be
used for mobile Internet access to the receiver.
•
Activate the Bluetooth device to allow access to the web interface via
Bluetooth PAN connection or to a data stream via Bluetooth serial
connection.
OR
Activate the WLAN adapter and configure WLAN profiles to access the
receiver with WLAN capable devices or stream data using a WLAN
connection.
Create new users and set the access level for the receivers web interface.
Configure and open remote access connections for OWI based software, such as
GNSS Spider to the receiver.
Activate or deactivate the Ntrip caster, define the settings for the port it runs on and
view the configuation of mount points and data types.
Set the HTTP port number or configure secure access to the web interface via an
SSL (Secure Socket Layer) connection.
Allow access to the receivers web interface when using a dynamic IP address by
configuring and enabling the DynDNS functionality.
Configure access to the receivers FTP server (SD card).
Create, configure or delete modem, radio and GSM devices to be used with the
receiver.
Activate the sending of event emails that contain the event log information.
Set the auto delete interval for all event log entries.
Configure the power up and low power behaviour of the receiver according to the
intended use case.
Enable Simple Network Management Protocol to monitor the GR/GM receiver for
conditions that warrant administrative attention.
Load new firmware or purchased options to the receiver, change the language or
use the tools to format or reboot the receiver.
6: Context sensitive help
213