Gnss Spider <-> Gr/Gm Configuration - Leica GR10 Operational Manual

Operational Manual (Online Help)
GNSS Spider <-> GR/GM configuration
When working with a GR/GM Series instrument and an active connection to Leica GNSS Spider, the settings on the receiver
can be changed from either side. The last stored/uploaded settings will overwrite everything that had been configured before.
Starting and Stopping the active GR/GM Series site in Leica GNSS Spider has only an effect on the __spider logging session
and the GNSS Spider data streams in the GR/GM Series.
It activates or deactivates the logging session and deletes or creates the data streams. All other logging sessions and data
streams are not affected by a start or stop of a GR/GM Series GNSS Spider site.
When the user selects Upload settings in the Leica GNSS Spider software, all settings configured for this site are uploaded to
the connected receiver. Since this includes tracking settings, changes of the site code and the receiver coordinates, logging
and streaming is interrupted every time the GNSS Spider configuration is loaded onto the GR/GM Series instrument.
For advanced information refer to the Leica GNSS Spider Online Help.
Related topics
GNSS Spider logging session
GNSS Spider data streams
306