Status: Data Streams - Incoming - Leica GR10 Operational Manual

Status: Data streams - Incoming

Background information
Displays a list of all configured Incoming data streams from meteo and tilt devices that send data to the receiver.
Field Description
The table below describes the fields in the Data streams / Incoming tab.
The information shown is dependent on the settings configured via the Data stream wizard on the GNSS management: Data
streams / Incoming tab page.
Press the Refresh icon to update the displayed data.
Meteo Description
Name The name of the configured meteo device.
Serial number The serial number of the configured meteo device.
Data time The time and date of the displayed temperature, pressure and humidity reading.
Temperature The temperature recorded by the device at the data time.
Pressure The pressure recorded by the device at the data time.
Relative humidity The relative humidity recorded by the device at the data time.
Wind azimuth The wind azimuth (deg) from the direction that the wind blows, recorded by the device at the data
time.
Wind speed The wind speed in meters per second (m/s), recorded by the device at the data time.
Rain Increment The rain accumulation since last measurement in millimetres (mm), recorded by the device at the
data time.
Hail indicator
The hail detected since last measurement in hits per square centimetre, recorded by the device
at the data time.
The data messages listed above are not supported by all meteo sensors.
Tilt Description
Name The name of the configured tilt device.
Serial number The serial number of the configured tilt device.
Data time The time and date of the displayed temperature and inclination.
Temperature The temperature recorded by the device at the data time.
Inclination X The inclination X recorded by the device at the data time.
Inclination Y The inclination Y recorded by the device at the data time.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Real time Description
Icon
Type/Message The configured message type and version received and used for position correction.
Click on the underlined message type to open a list box showing how many satellites are used.
Percent received The percentage of data received versus expected within the last minute.
Last received The latency of the last received correction information in seconds.
Connection: port The connection type and port over which the data stream is received.
Related topics
Data stream is active.
Data stream is inactive.
6: Context sensitive help
115