Status: Data Streams - Outgoing - Leica GR10 Operational Manual

Status: Data streams

Status: Data streams - Outgoing

Background information
Displays a list of all configured Outgoing data streams from the receiver.
Field Description
The table below describes the fields in the Data streams / Outgoing tab.
The information shown is dependent on the settings configured via the Data stream wizard on the GNSS management: Data
streams / Outgoing tab page
The data streams can be sorted by each field by clicking on the header.
Press the Refresh icon
Real time Description
Icon
Type/Message The configured message type and version.
Click on the underlined message type to open a list box showing how many satellites are used.
Data rate
The configured rate at which data is sent out.
Last sent
The latency of the last outgoing data stream sent in seconds.
Connection: port The connection type and port over which the data stream is sent out.
LB2 Description
Icon
Data Shows which data output is active; Meas.Data (measurement data) and Sat.Data (satellite data).
Message
The configured message type (D or E) that is sent.
Data rate
The configured rate at which data is sent out.
Connection: port The connection type and port used.
NMEA Description
Icon
Message
The configured NMEA messages activated for the outgoing data stream.
Click the listed NMEA messages to view
NMEA message properties
The table below describes the additional NMEA message properties that are shown when the
underlined NMEA Messages are selected.
NMEA message
properties
Message
Rate
to update the displayed data.
Data stream is active.
Data stream is inactive.
Data stream is active.
Data stream is inactive.
Data stream is active.
Data stream is inactive.
Description
The configured NMEA messages activated for the outgoing data
stream.
The configured data rate for the NMEA message.
additional properties
.
6: Context sensitive help
113