Device Management: Gsm / Csd Initialization - Leica GR10 Operational Manual

Operational Manual (Online Help)

Device Management: GSM / CSD initialization

Setting Descriptions
The table below describes the settings that can be configured on the GSM / CSD initialization page.
Settings Description
Init string 1
Enter a valid AT command to initialize the device.
Init string 2
Enter a valid AT command to initialize the device.
Dial string
Enter a valid AT command to connect to the device.
Hangup string
Enter a valid AT command to end the network connection.
Escape string
Enter a valid AT command to switch into command mode before using the hangup string.
Press to change settings.
Press to save the logging session.
Press to cancel and return to Device Management: Modem / Phone
268