Leica GR10 Operational Manual page 60

Operational Manual (Online Help)
Recommended user action: Exchange the external USB drive.
The external USB drive is full. Data logging is continued until the SD card is full.
OR
The external USB drive is configured to be used but currently not detected.
Recommended user action: Immediately exchange the external USB drive or detach and
reattach the USB drive.
The external USB drive is not available on the GR/GM10 receiver.
Data stream status
The data stream status is shown with an icon and the number of currently active incoming data streams.
One or more data streams are configured and active. Data is being streamed.
Indicates that the data streams are active but no data is streamed.
Recommended user action: Check that satellites are tracked and a navigated position is
available. Check that the correct reference position is entered.
Raw data logging status
The raw data logging status is shown with an icon and the number of currently active logging sessions.
Active logging sessions are configured on the receiver and data is being logged.
Active logging sessions are configured on the receiver but Smart clean-up is deleting data
from all or some of the configured logging sessions.
Recommended user action: Check the remaining space on the SD card and delete old data
if necessary.
Active logging sessions are configured but
Recommended user action: Check the SD card and the tracking status.
The time since the receiver was turned on.
This icon is only shown if the receiver is turned on because of an active wake-up session.
Smart clean-up status
Smart clean-up is active.
Smart clean-up is inactive.
Indicates active logging sessions are available and Smart clean-up is deleting data from all or
some of these sessions.
Recommended user action: Please check the remaining space on the SD card and delete
old data if necessary.
Status: Tracking
58
•
The SD card is full
or
•
No navigated position is available.