Gnss Management: Create/Edit An Antenna - Leica GR10 Operational Manual

Operational Manual (Online Help)

GNSS management: Create/Edit an Antenna

Field Descriptions
The table below describes the fields in the Create/Edit an Antenna tab.
Field Description
Name The antenna name.
When editing an existing antenna, the antenna name cannot be changed.
Horizontal offset Horizontal distance from the physical reference point (ARP) to the point on the antenna where the
slope height reading is measured. If you are using vertical height readings (Height Hook) this
value may be 0. See also GNSS Management: Calculate the antenna height reading.
Vertical offset Vertical distance from the ARP to the point where the height reading is measured to. If you are
using slope height readings to a point above the physical reference plane this value must be
negative. See also GNSS Management: Calculate the antenna height reading.
L1 phase offset The L1 and L2 phase offset values.
L2 phase offset
IGS name The IGS name for the antenna.
Serial number The antenna serial number.
Related topics
GNSS management: Antenna management
GNSS management: Select antenna
GNSS Management: Calculate the antenna height reading
206