Setup Via Web Interface Over Bluetooth - Leica GR10 Operational Manual

Setup via Web Interface over Bluetooth or WLAN (GR25)

Setup via Web Interface over Bluetooth

Only available for GR25 with bluetooth radio installed.
Step Description
1 Turn on the GR25.
2 Use the arrow buttons, go to Configuration, Network Config. Scroll down to the Bluetooth field and use the
left button to enable Bluetooth.
3 Activate bluetooth on your computer and search for Bluetooth devices. The instruments hostname will be
listed.
4 Pair the Bluetooth connection of your computer with the instrument.
The default pairing code is 0000. The pairing code can be changed later in the web interface.
5 Once the pairing is finished, right click on the GR device listed in your Bluetooth devices panel and select
Connect.
Go to the Network connections panel of your computer and select the Bluetooth network connection
6
connected to the GR instrument. Right click and open the properties.
7 Highlight the TCP/IP connection and click on the Properties button.
8 Enter the IP address 192.168.253.x and subnet mask 255.255.255.0.
9 Open a browser and type in the IP address: 192.168.253.2 to access the Web interface.
10 Use the default User name (Admin) and Password (12345678).
After logging in the first time you must create a new user account, including a new user name and password.
The
default user account can then be deleted. Refer to the GR Series Operational Manual (Online Help) for a
step-by-step
guide.
11 Configure the instrument for all required settings.
a. Left button
b. Right button
c. Up button
d. Cancel button
e. Down button
f. Enter button
g. Screen
h. ON/OFF button
5: Getting started
81