Leica GR10 Operational Manual page 116

Operational Manual (Online Help)
Connection: port The connection type and port over which the data stream is sent out.
BINEX Description
Icon
Message The configured BINEX messages activated for the outgoing data stream.
Click the listed BINEX messages to view
BINEX message properties
The table below describes the additional BINEX message properties that are shown when the
underlined BINEX Messages are selected.
NMEA message
properties
Message
Rate
Connection: port The connection type and port over which the data stream is sent out.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Related topics
GNSS management: Data streams overview
GNSS management: Outgoing data stream
Streaming session wizard: Configure real time out data stream
Streaming session wizard: Configure LB2 data stream
Streaming session wizard: Configure NMEA data stream
Streaming session wizard: Configure BINEX data stream
114
Data stream is active.
Data stream is inactive.
Description
The configured BINEX messages activated for the outgoing data
stream.
The configured data rate for the BINEX message.
additional properties
.