Status: Logging Sessions - Leica GR10 Operational Manual

Status: Logging sessions

Background Information
View status information about all configured logging sessions.
Configure or edit a logging session via GNSS management / Logging sessions. A logging session wizard will guide you through
the procedure.
Field Description
The table below describes the fields in the Status: Logging session page.
The logging sessions can be sorted by each of these criteria by clicking on the header.
Field Description
Icon
To activate or deactivate a session go to GNSS management / Logging session / Sessions tab.
To activate or deactivate Smart clean-up go to GNSS management / Logging session / Smart
clean-up tab.
Name The name of the logging session.
Type The configured logging session type (MDB, RINEX or Hatanaka) and if the session is continuous
or timed.
Runtime The time that the session has run or is running since it was last activated. For timed logging
sessions this is the overall time of the session logging data to files.
#Files
The number of files logged in the session runtime and available on the SD card or USB device for
this logging session.
Please note: If logging sessions are configured and the SD card is formatted, the number of files for
the logging sessions will not be updated immediately. This may take several minutes.
Logging session properties
The table below describes the additional logging session status information that is shown when the logging session Name is
selected.
Field Description
Session name The configured logging session name.
Data type The configured data type.
Session Priority The configured session priority which determines the Smart clean-up tasks.
Go to GNSS management / Logging sessions / Smart clean-up tab for further information and to
enable the Smart clean-up functionality.
Session type The configured session type, either continuous or timed.
Timed allows specific logging intervals to be defined.
Logging session is active.
Logging session is inactive.
Smart clean-up is activated.
Smart clean-up is activated and deleting files.
Logging session is blocked by Smart clean-up.
6: Context sensitive help
117