Operational Manual (Online Help)
Status tracking: BEIDOU
Field Description
The table below describes the fields in the Status: BEIDOU tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page and which satellite
options are available on the receiver.
Press the Refresh icon
to update the displayed data.
Field
Description
Sat
The Pseudo Random Noise (PRN) number of the satellite.
Elevation
The elevation of the satellite in degrees. An arrow is shown to indicate if the satellite is rising or
setting.
Azimuth
The azimuth of the satellite in degrees.
S/N B1
The signal to noise ratio on B1. The number is shown in brackets if the signal is not currently being
used in the position calculations.
S/N B2
The signal to noise ratio on B2. The number is shown in brackets if the signal is not currently being
used in the position calculations.
Satellite Health
Healthy
Lists the PRN numbers of the healthy satellites.
Bad
Lists the PRN numbers of the unhealthy satellites. The satellites are available in the almanac but are
flagged unhealthy.
Not available
Lists the PRN numbers of the unavailable satellites. The satellites are not available in the almanac.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Related topics
Tracking: General
Tracking:GPS
Tracking: GLONASS
Tracking: GALILEO
Tracking: SBAS
Tracking: QZSS
GNSS management: Tracking
110