Status Tracking: General - Leica GR10 Operational Manual

Operational Manual (Online Help)
Status: Tracking

Status tracking: General

Field Description
The table below describes the fields in the Status: General tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page
and which satellite options are available on the receiver.
If the satellite health setting has been changed to a user defined setting in the GNSS management: Tracking
page, then the satellite PRN will be displayed in brackets to indicate that this is not the almanac transmitted
health status for that satellite.
Press the Refresh icon to update the displayed data.
Field
Date of GPS almanac
Date of GLONASS
almanac
Date of GALILEO
almanac
Date of BeiDou almanac
Date of QZSS almanac
Time signal
Satellite Health
Healthy
Bad
Not available
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
If the health status of a satellite is changed by a user and is different to what is sent in the broadcast
ephemeris, this satellite is shown in brackets. Go to GNSS management: Tracking to changes the health
status of a satellite.
104
Description
The date and time of the GPS almanac.
The date and time of the GLONASS almanac.
Only available for receivers with the GLONASS option.
The date and time of the GALILEO almanac.
Only available for receivers with the GALILEO option.
The date and time of the BeiDou almanac.
Only available for receivers with the BeiDou option.
The date and time of the QZSS almanac.
Only available for receivers with QZSS option.
Shows the oscillator configured on the receiver. If no external oscillator is used, Internal
clock is shown.
If an external oscillator is configured with the oscillator fallback option active and no time
signal was detected for more than 5 minutes or the antenna was disconnected for more
than 5 minutes, the receiver starts using the internal clock instead of the selected external
oscillator.
A warning message will be shown in this field that a fallback to internal oscillator occurred.
If an external oscillator is selected but not connected, the receiver will
not track any satellite signals.
GPS, GLONASS, Galileo, BeiDou and QZSS
Lists the PRN numbers of the healthy satellites.
Lists the PRN numbers of the unhealthy satellites. The satellites are available in the
almanac but are flagged unhealthy.
Lists the PRN numbers of the unavailable satellites. The satellites are not available in the
almanac.