Gnss Management:tracking Beidou - Leica GR10 Operational Manual

GNSS management:Tracking BEIDOU

Background information
Tracking BeiDou options may be used to control which health settings are used for each BeiDou satellite tracked by the
receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Tracking BeiDou tab.
Field Description
Satellite health For each tracked satellite it is possible to set the health as Auto, Healthy or Bad. Use the drop
down list to change the satellite health for all satellites to the same value.
Satellite The PRN satellite number.
Health from almanac Shows the health setting for this satellite as received from the broadcast navigation message.
NA, is shown for satellites where no health information is available in the ephemeris.
User defined health Shows the configured health setting for each satellite. Either Auto, Healthy or Bad. This field
can be edited via the list box.
If the setting is set to Auto, the satellite is used with the health received from the ephemeris. If
the setting is different from Auto, the user defined health setting is used.
Related topics
GNSS management: Tracking General
GNSS management: Tracking GPS
GNSS management: Tracking GALILEO
GNSS management : Tracking GLONASS
GNSS management: Tracking QZSS
6: Context sensitive help
143