Leica GR10 Operational Manual page 212

Operational Manual (Online Help)
•
The receiver powers down 1-30 seconds after the configured time. Logging files may not be
finalised before the receiver is powered down. These files will be finalized when the receiver boots
the next time.
•
After the last interval of a wake-up session has ended, the receiver is powered down and stays off.
Remote access is not possible after the power down.
Setting Descriptions
The table below describes the fields in the Wake-up sessions page.
Settings
Icon
Name
Next start time
Next end time
Remaining interv.
Delete
Edit wake-up session
Create new wake-up session (copy)
Activate
Create new wake-up session
Wake-up session properties
The table below describes the content of the Wake-up session properties pop up box. Press on the underlined Wake-up
session name to open the pop-up box.
Properties
Name
Session start
Session end
210
Description
Wake-up session is active and running.
Wake-up session is inactive or the last wake-up interval has
ended.
Wake-up session is active but is currently not running.
The configured name of the wake-up session.
If a wake-up session was configured when creating a logging session, the
name shown will be the logging session name.
The time the receiver is configured to wake up next.
The time the receiver is configured to power down next.
Number of remaining repetitions of the wake-up session.
Press delete to permanently delete the corresponding wake-up session.
Press to edit the wake-up session.
Press to create a new wake-up session based on the existing wake-up
session.
The wake-up session is deactivated. Press to activate.
The wake-up session is activated. Press to deactivate.
Press to create a new wake-up session.
Description
The configured name of the wake-up session.
The start time and date of the first wake-up interval of this session.
The calculated power down time and date of the last interval of this wake-
up session.
•
Select at to enter a specific power down time.
•
Select after to enter the interval length.
•
Select No end to configure an infinite wake-up session.