Network Connections: Bluetooth - Leica GR10 Operational Manual

Network connections: Bluetooth

Background Information
Use Bluetooth configuration to configure the Bluetooth device on the receiver.
Bluetooth is available only on GR25 receivers with the bluetooth hardware option.
Setting Descriptions
The table below describes the settings that can be configured on the Bluetooth page.
Configure device for Internet
usage
Enable Bluetooth radio
Bluetooth name
Enable discovery
Bluetooth security code
Related topics
Status: Network connections
How to use Bluetooth on the GR25
Description
Activate to power the Bluetooth device on the receiver. If disabled, the GR25
Bluetooth device cannot be used.
It is recommended to turn off the Bluetooth device when not in
use to lower the power consumption on the receiver.
The Bluetooth name that the GR25 is detected with is always
equal to the Receiver hostname configured in Receiver setup:
Network connections, Ethernet tab.
Bluetooth name is the hostname of the receiver. Please go to Receiver setup /
Network connections: General to change the hostname/bluetooth name.
Activate to allow other devices to detect the Bluetooth device of the GR25.
When deactivated, only devices that had previously been connected to the GR25 via
Bluetooth will be able to see the Bluetooth device on the receiver.
Default security code is 0000.
Change the code to only allow specific devices to pair with the GR25 Bluetooth
device. Other devices will be able to see the GR25 Bluetooth device but will not be
able to connect.
6: Context sensitive help
221