Logging Session Wizard: Mdb - Leica GR10 Operational Manual

Operational Manual (Online Help)

Logging session wizard: MDB

Setting Descriptions
The table below describes the settings that can be configured on the MDB page.
Setting
Logging rate
Length of file
Dynamics
Log doppler observations
When changing the logging rate of a high rate logging session, the session must first be deactivated. After
changing the rate the session can be reactivated and will then use the new rate.
Example: A 20 Hz MDB logging session should be changed into a 50 Hz MDB session.
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Logging session.
192
Description
Select the rate at which the observations are to be logged.
Note: a faster logging rate results in higher resource consumption on the receiver.
Choose a value from 5 minutes to 24 hours.
The file length defines how long data is written to one file before a new file is created.
Raw data for the MDB logging session can be logged in static or moving (kinematic)
mode.
Activate or deactivate logging doppler observations to the MDB file.
to continue to the next wizard step.