Remote Access Wizard: Configure Serial Port - Leica GR10 Operational Manual

Operational Manual (Online Help)

Remote access wizard: Configure Serial port

Background Information
Configure the serial port settings to connect the receiver to a computer directly via a serial cable.
The settings for the COM port on the computer must match the settings for the serial connection on the receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Configure serial port page.
Setting
Port name
Baud rate, Parity, Data
bits, Stop bits
Flow control
Press to go back to the previous wizard step. Press
Press to cancel and return to Spider and remote access: Overview .
242
Description
Only available on the GR25.
Select the physical serial port for data transmission
•
Serial port 1
•
Serial port 2
For the GR/GM10, Serial port 1 is configured automatically as there is
only one serial port available.
For slot in devices, this field is not available, the slot-in port is selected
automatically.
Select the port settings for the communication between the receiver and the PC's Com port.
Defines which kind of handshake is used.
•
None: No handshake.
•
RTS/CTS: Handshake in both directions.
to continue to the next wizard step.