Create New Mount Point - Leica GR10 Operational Manual

Operational Manual (Online Help)

Create new mount point

Setting Descriptions
The table below describes the settings that can be configured in the New mount point page.
Field
Mount point name
Data format
Identifier
Navigation system
Source password
Use client authentication
Client user name
Client password
Activate
All Ntrip clients connecting to the same mount point will be using the same user name and password.
250
Description
Enter a unique mount point name.
Maximum number of characters recommended is 24.
ASCII characters
Only Alphanumeric
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Define the data format that will be distributed via this mount point. This entry will be
listed in the source table.
Enter more detailed information to help identify the mount point, e.g. the site location.
Enter the satellite systems activated for the data streamed via this mount point.
Define a password for authentication of the Ntrip source. The password must be
between 8 and 20 characters in length.
ASCII characters
Only certain
mixture of letters, numbers and symbols.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Activate if you would like clients to be forced to send a user name and password in
order to connect to this mount point.
Deactivate if any client is allowed to connect to this mount point without
authentication.
Define a user name for the clients to identify on the mount point.
ASCII characters
Only Alphanumeric
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Define a password for the clients to identify on the mount point.
ASCII characters
Only Alphanumeric
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Activate the mount point instantly when saving, or leave this check box empty to
store the mount point and activate later.
and + _ are allowed.
are allowed. The password should contain a
and + _ are allowed.
and + _ are allowed.