Leica GR10 Operational Manual page 239

Press to create a new remote access configuration based on the existing configuration.
Create new
Spider and remote
port (copy)
Activate
Create new Spider Click to open the Spider/remote access wizard.
and remote port
The wizard is a tool that guides you through the following stages of a remote access configuration:
1.
2.
3.
Related topics
Remote access wizard: Connection
Remote access wizard: Configure TCP/IP server
Remote access wizard: Configure TCP/IP client
Remote access wizard: Configure Ntrip server (source)
Remote access wizard: Configure Serial port
Remote access wizard: Configure Radio
Remote access wizard: Configure GSM / Modem / CDMA-dial up
Remote access wizard: Set port status
The remote access is deactivated. Click to activate the stream.
The remote access is activated. Click to deactivate the stream.
Connection type - Select if you want to connect the GR/GM Series instrument to the
Spider site server via TCP/IP server, TCP/IP client, Ntrip server (source), Serial port,
Radio or GSM / Modem / CDMA - dial up.
Device selection and configuration.
Activation of remote access.
6: Context sensitive help
237