Ntrip Caster: Mount Points Tab - Leica GR10 Operational Manual

Ntrip caster: Mount points tab

Background Information
This page provides an overview of the mount points configured on the Ntrip caster.
A mount point can be activated and deactivated. When deactivated, no client or source connections are allowed.
Configure new mount points including user authentication and the data type (as it will appear in the source table) by pressing
Creating new mount point
Setting Descriptions
The table below describes the fields in the mount points tab.
Setting
Icon
Mount point name
Stream Type
Delete
Edit mount point
Create new
mount point
(copy)
Activate
Create new
mount point
Related Topics
Status: Ntrip caster
Outgoing data stream wizard: Configure Ntrip server (source)
Ntrip caster: Caster tab
Ntrip caster: Create new mount point
Ntrip
.
Description
Mount point is active
Mount point is inactive.
To activate or deactivate a data stream press the Activate icon.
The name of the configured mount point. This name is used by the Ntrip source and
clients to define which data stream to connect to.
The configured outgoing data type as it will appear in the source table. This setting
does not define which data type is actually steamed via the mount point.
Press delete to permanently delete the mount point.
Press to edit the mount point settings. The Edit mount point page will open.
Press to create a new mount point based on the settings of an existing mount point.
The mount point is inactive. Click to allows Ntrip source and clients to
connect, and data to be streamed.
The mount point is active. Click to deny Ntrip source and client
connections.
Upon pressing Create a new mount point, the New mount point page opens. On
this page is it possible to configure data format, Ntrip source passwords, Ntrip client
authentication and activate the mount point
6: Context sensitive help
249