5: Getting started
Operation: Overview
Menu option
Network technology and protocol overview
Equipment Setup
Working with the Memory Device
Step-by-step guides
•
Use DHCP to automatically assign a hostname and all network parameters to a GR/GM Series receiver
•
Use DynDNS to assign a hostname to a GR/GM Series with a static IP
•
Access the web interface for the first time and change the default user
•
Activate Leica support access step-by-step
•
Configure coordinates and site name step-by-step
•
Configure tracking settings step-by-step
•
Configure a RINEX logging session step-by-step
•
Configure a data stream step-by-step
A detailed description of every Web interface page is included in the Context sensitive help section.
Description
An explanation of some of the networking technologies and protocols
which are used by the receiver.
A step-by-step overview of the required equipment and cables to set
up the receiver.
•
Basic setup
•
Setup via Web interface over Ethernet and DHCP
•
Setup in a non - DHCP network
•
Install USB drivers
•
Setup via Web interface over USB
Important safety directions for using the SD card and a step-by-step
guide on how to insert and remove an SD card.
65