Configure Coordinates And Site Name Step-By-Step - Leica GR10 Operational Manual

Operational Manual (Online Help)

Configure coordinates and site name step-by-step

This section explains how to configure site coordinates and site name
Step Description
1
Access the web interface.
2 Go to page GNSS management / Site name and coordinates.
3 Enter values in the text field Site code. This four character ID will be used as identifier for the instrument and
will be used for the name of logged files (first four characters of the file name).
4 Entering values in fields Site name, Marker name and Marker number is optional as this information is only
used as header information when creating RINEX files.
5 In the second section of the page you can enter the reference coordinates of your site. Either geodetic or
Cartesian coordinates can be entered.
6 The time zone can be set to have all receiver activities aligned to a specific time zone. As a result all event
messages will refer to the chosen time zone. Also the logged files will have creation time stamps referring to the
chosen time zone.
7 Press the Save changes button to save all settings.
92