Format Receiver Settings Via Instrument Buttons Step-By-Step - Leica GR10 Operational Manual

Format receiver settings via instrument buttons step-by-step

Background information
The receiver settings can be deleted without the web interface by using the Power and Function button on the GR/GM10 or
buttons and display on the GR25.
For detailed information on the instrument buttons go to User Interface GR/GM10 / Keyboard or User Interface GR25 /
Keyboard.
Format receiver settings on the GR/GM10 step-by-step
Follow these steps format the receiver settings.
Step Description
Make sure the receiver is turned on.
1 Activate the dual button functionality.
Press and hold both the
red.
2
After 1s, the
3
Press the
4
Press the
values.
5 After the system format is completed, the receiver reboots with all settings set back to the default settings.
Format receiver settings on the GR25 step-by-step
Follow these steps format the receiver settings.
Step Description
Make sure the receiver is turned on.
1 Press any button to turn on the screen when in sleep mode.
2 Navigate to Configuration / Maintenance.
3 Highlight Format System (all) and press the ENTER button.
4 Press the ENTER button again in the confirmation message.
5 After the system format is completed, the receiver reboots with all settings set back to the default settings.
Related topics
Keyboard
Appendix F: GR/GM10 Default settings
Appendix F: GR25 Default settings
Format receiver settings via Web interface step-by-step
Function button and
Raw data logging LED starts flashing green.
Function button (4 times) until the
Function button for 3 s to set all configured instrument settings back to factory default
Power button for 2s until all LEDs are flashing
Power LED starts flashing green.
12: Default settings
349