Led Indicators On Gr/Gm10 - Leica GR10 Operational Manual

Operational Manual (Online Help)
GR/GM10

LED Indicators on GR/GM10

The GR/GM10 has Light Emitting Diode indicators. They indicate the basic instrument status.
Description of the LED's
IF the
off
Power LED
green
off
SD card LED
green
yellow
red
Raw data off
logging LED
green
yellow
38
is THEN
The instrument is turned off.
The instrument is turned on.
No SD card inserted or power is off.
SD card is inserted. The free space on the SD card is greater than
20%.
The free space on the SD card is below 20%.
SD card is full. Data logging has stopped.
No active logging sessions or power is off.
Active logging sessions are configured on the instrument and data is
being logged.
Active logging sessions are configured but Smart clean-up is
deleting data from all or some of the configured logging sessions.
OR
Active logging sessions are configured but no position is available.
a. Power LED
b. SD card LED
c. Raw data logging LED
d. RT out data stream LED
e. RT in data stream LED
f. Position LED
Recommended user action: Activate the Smart
clean-up or the automatic file delete for each
logging session.
Recommended user action: Immediately
activate the Smart clean-up or the automatic file
delete for each logging session.
Recommended user action: Check the
remaining space on the SD card and delete old
data if necessary. Check the tracking and
position status.