Web interface: User Interface
Per default Java Script is activated in all browsers. If it is deactivated in your browser, you may not be able to
display and use all web interface functionality. We recommend to have Java Script active when using the
Web interface.
The basic Layout of the web interface is the same on all pages. On the top is the web interface header that contains receiver
site code, installed firmware version and the current system time. Below is the menu bar, which is used to navigate in the web
interface.
Below on the right is the Status block that summarizes the most important receiver functionality information. This status block is
visible on every page.
Left of the status block is the content area. This contains the actual information for this page, e.g. status information, a
configuration page or links to receive support and information directly from Leica Geosystems AG.
Update rates for each element in the status block is as follows: Event log: 5s, Tracking block: 10s, General block: 15s.
The default appearance of the Web interface consists on the following main components:
Web interface components
Header
The header contains general information about the receiver, including
•
Receiver type
•
Loaded firmware version.
•
Site code
4: User Interface
55