Use Dhcp To Automatically Assign An Ip Address And All Network Parameters To An Instrument - Leica GR10 Operational Manual

Operational Manual (Online Help)

Use DHCP to automatically assign an IP address and all network parameters to an instrument

This procedure requires DHCP and DNS servers within the network the GR/GM receiver is connected to. As a result all network
parameters will be assigned automatically. No IP address, subnet mask, gateway or DNS server IP address has to be assigned
manually. The assigned hostname can be used to access the receiver within the network. Per default the hostname on the
GR/GM receiver is GRxxxxxxx or GMxxxxxxx, where "xxxxxxx" is the serial number of the GR/GM receiver.
Step Description
1 Enter the web interface using an Administrator user account.
2 Go to Receiver Setup / Network Connections.
3 On the General tab enter a receiver hostname.
4 Tick the check box Obtain an IP address automatically.
5 Click on Save changes to save all settings.
These are the default settings. When you first access the receiver's web interface in a DHCP network, the
hostname can be used as described above without editing any settings. If the settings have been edited,
formatting the receiver settings will also bring back the described configuration.
88