Gr25 User Interface; Led Indicators On Gr25 - Leica GR25 User Manual

GR25 User Interface

2.

LED indicators on GR25

2.1.
a b c d e f g
IF the is
Power LED off
green
flashing
green
yellow Only shown if using an internal battery. The remaining battery capacity is low.
red
flashing
yellow
flashing
red
P.Bascou from the LEICA GR10-GR25 User Manual
THEN
The instrument is turned off.
The instrument is turned on.
The instrument is on but has switched to a backup power source. If an internal
battery is used, indicates that the remaining battery capacity is high.

Recommended user action: Provide
an alternative power source.
Only shown if using an internal battery. The remaining battery capacity is
critical.

Recommended user action: Switch to
a new power source immediately.
The internal battery is charging.

Charging is only indicated by LEDs when
the instrument is turned off. When the instrument is on, the LEDs
indicate the current power level.
Charging of the internal battery is activated but there is an error in charging
the battery.

Recommended user action: Check and
reattach the battery. If the problem does not disappear, please send the
battery to Leica Geosystems Service.

Charging is only indicated via LEDs when
the instrument is turned off. When the instrument is on, the LEDs
indicate the current power level.
a Power LED
b SD card LED
c Raw data logging LED
d RT out data stream LED
e RT in data stream LED
f Position LED
g Bluetooth LED
3