Leica GR10 Operational Manual page 250

Operational Manual (Online Help)
•
If an Ntrip server (source) is connected to the Ntrip caster and no data is received from the source for more than 15
s, the Ntrip caster will disconnect the Ntrip server (source). This is necessary as it may happen that an Ntrip server
(source) disconnection may not be done properly, leaving the Ntrip caster assuming that the connection is still
available. If the Ntrip server (source) now tries to reconnect, a "mount point taken" message would be issued and the
connection not be allowed. To prevent this, the connection is regularly checked for data transmission. Please make
sure the data stream sent to the Ntrip caster has a rate higher than 15 s. If the connected Ntrip server (source) is a
GR/GM receiver, it will continuously try to reconnect every 5 s.
Ntrip client connections:
•
If an Ntrip client connects to the Ntrip caster and tries to connect to a non-existing mount point or a mount point that
does exist but is currently not receiving any data from an Ntrip server (source), the Ntrip caster will return an "Invalid
mount point" error message. If the Ntrip client is a GR/GM receiver, it will continuously try to reconnect every 5 s.
•
If an Ntrip client connects to the Ntrip caster and tries to connect to a mount point using a wrong user name or
password, the Ntrip caster will return an "Authentication failed" error message. If the Ntrip client is a GR/GM receiver,
it will try to reconnect every 5 s for 30 s.
•
If an GR/GM receiver Ntrip client is connected to the Ntrip caster and no data is received from the Ntrip caster for
more than 15 s, the Ntrip client will assume that the connection is not valid anymore. This is necessary as it may
happen that the connection from the Ntrip caster to the Ntrip client may be interrupted, leaving the Ntrip client
assuming that the connection is still available. Please make sure the data rate connected to the Ntrip caster is higher
than 15 s. If the connected Ntrip client is a GR/GM receiver, it will continuously try to reconnect every 5 s.
Related Topics
Status: Ntrip caster
Outgoing data stream wizard: Configure Ntrip server (source)
Ntrip caster: Mount points tab
Ntrip
248