Gnss Management: Smart Clean-Up - Leica GR10 Operational Manual

Operational Manual (Online Help)

GNSS management: Smart clean-up

Background Information
The SD card in the receiver can run full if the logging session data files are not removed (e.g. by FTP push or download).
Smart clean-up ensures that the SD card will not run full, while preserving the data that has the highest priority to the user.
Smart clean-up functionality differs from auto delete files. Auto delete files is time dependant, whilst Smart clean-up is
dependent on the free storage space on the SD card. Smart clean-up allows the available SD card space to be used up
completely without the risk of losing important data.
Smart clean-up will delete files from both active and inactive logging sessions.
Setting Descriptions
The table below describes the fields in the Smart clean up tab.
Setting
Enable Smart clean-up
186
Description
•
Active
When the SD card is almost completely filled by logging session
data, the Smart clean-up will first delete the oldest files with the
lowest priority to create space for new files. (Note: The logging
session priority is configured via the first logging session wizard
page, Create a new logging session).
Once all data from low priority session is deleted, the receiver will
stop logging data for low priority logging sessions if the SD card
continues to fill up. Next, medium priority session will be deleted and
the receiver will stop logging medium priority sessions.
Once only high priority sessions remain active, logging will run in a
loop. Only high priority data will be logged and the oldest files are
deleted as soon as necessary. This ensures that there is always
space available for the latest high priority data.
Activate Smart clean-up to always log the most recent and highest
priority logging session data.
•
Inactive
All running logging sessions will continue logging as configured, until
the SD card is full. All logging sessions will then stop logging data.
Leave this setting unchecked if you don't want to lose old data and
are unaffected by the possibility of all logging sessions stopping due
to a full SD card.
Press to save any setting changes.