Status: Event Log - Leica GR10 Operational Manual

Status: Event log

Background Information
The Event log contains a list of status and information messages produced by the receiver. The Event log is updated every 5
seconds.
The messages from the Event log can be sent to an administrator via an event email. Sending event emails can be configured
and activated via Receiver setup / Event log.
Event log messages can be filtered to easily find specific information.
Field Description
The table below describes the fields in the Status: Event log page.
Press the Refresh icon to update the displayed data.
Field Description
Icon
Date / Time The local date and time of the message.
Message The text message created by the receiver.
Press to download the event log content. The content of the event log will be displayed in a new
Download
browser window and can be stored on the PC.
Filter the event log content to find specific information. The filter settings allow sorting of the
Filter
messages by time, content or message type.
Press to clear the filtering of the event messages and return to the main Event log page.
Clear
filter
Indicates that an event log filter is currently applied. Press to change the filter details.
Filter
Filter Event log content
Select the Filter icon . Select the filtering limits and then press the Apply icon
Field Description
From/To Select the interval to view messages From (the selected data and time) and To (the selected data
and time).
Warning message
This level of receiver message indicates that vital functionality on the receiver
was interrupted. Action should be taken by an administrator to ensure correct
receiver operation.
General message
A general message indicates a problem with a receiver task that does not
influence the most important functionality. Investigate by checking the receiver
configuration.
Information message
Information messages reflect events from the normal receiver activity. No action
is required by the administrator.
6: Context sensitive help
.
123