Status: Receiver Information - Receiver - Leica GR10 Operational Manual

Status: Receiver information

Status: Receiver information - Receiver

Background information
Provides an overview of receiver specific information such as serial number, installed firmware version and installed options.
Field description
The table below describes the fields in the Status: Receiver information / Receiver tab.
Press the Refresh icon to update the displayed data.
Instrument details
Instrument type
Serial number
Site code
System language
ME serial number
ME Hardware
The default functionality section, list the options that are installed per default on each GR/GM Series receiver.
Default functionality
Ethernet
GNSS Spider OWI
Loaded firmware
Maintenance end
Firmware
ME Firmware
ME Boot
Navigation software
LB2 / OWI
Operating system
EFI loader
EFI
XLDR
EBoot
CHAIN
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
Description
The receiver type.
Serial number of the receiver.
Four digit identifier for the receiver.
This is also used as the first four characters of the raw data (MDB) and RINEX file name
created on the receiver.
The language loaded on the receiver.
The serial number of the measurement engine.
The hardware revision of the measurement engine.
Description
Ethernet connection is available on every GR/GM Series receiver.
The Leica GNSS Spider software can connect and control any GR/GM Series receiver
per default. No additional option is needed.
Description
The expiry date of the software maintenance contract.
For information on Custom Care Packages visit the Leica Geosystems web page or
contact your local Leica Geosystems representative.
The firmware version (build number) loaded on the receiver.
If a new firmware version is available, all GR/GM receivers connected to the Internet will
show the message, A new firmware version is available on the Leica website.
Receivers with automatic firmware upload and installation active, will install the new
firmware when it is available.
Go to Receiver setup / Tools, Firmware tab to download the new firmware file.
The firmware version of the measurement engine.
The firmware version of the boot software for the Measurement Engine.
The navigation firmware version with the algorithms for signal processing.
The version number of the LB2/OWI commands.
The firmware version of the Windows CE operating system.
The firmware version of the Electronic Front Interface loader.
The firmware version of the Electronic Front Interface.
The firmware version of the XLDR loader component of the operating system.
The version of the Eboot loader component of the operating system.
The version of the CHAIN loader component of the operating system.
6: Context sensitive help
99