Leica GR10 Operational Manual page 59

Recommended user action: The user should urgently switch to a new battery or enable
charging.
Power status
The power status is shown with an icon and the current voltage level.
The primary power supply is in use and that the power level is valid (voltage is between the
configured power up and power down level).
The power level of the connected power source is high.
The receiver has switched to the secondary power supply
Recommended user action: Consider providing a new power source to replace the current
one.
The power level of the connected power source is be-coming low.
The icon indicates the overall power status. If a second power source is connected via a Y-
cable, both power sources are used.
Recommended user action: Consider providing a new power source to replace the current
one.
The power level of the connected power source is critical.
Recommended user action: The user should urgently switch to a new power source.
SD card status
The SD card status (icon) and the available space on the SD card MB(%) are shown.
SD card is inserted. The free space on the SD card is greater than 20%.
The free space on the SD card is below 20%.
Recommended user action: Activate the Smart clean-up or the automatic file delete for
each logging session.
The SD card is full. Data logging is stopped.
Recommended user action: Immediately activate the Smart clean-up or the automatic file
delete for each logging session.
External USB drive status
The USB drive status (icon) and the available space on the USB drive MB(%) are shown.
External USB drive is detected. The free space on the USB drive is greater than 20%.
The free space on the USB drive is below 20%.
4: User Interface
57