After installing the dual frequency option, the configured data streams must be restarted to enable both L1
and L2 streams.
Related topics
GNSS management: Data streams overview
GNSS management: Incoming data streams
Outgoing data stream wizard: Select data stream
Outgoing data stream wizard: Configure real time out data stream
Outgoing data stream wizard: Configure LB2 data stream
Outgoing data stream wizard: Configure NMEA data stream
Outgoing data stream wizard: Configure BINEX data stream
Outgoing data stream wizard: Connection
Outgoing data stream wizard: Configure TCP/IP server
Outgoing data stream wizard: Configure TCP/IP client
Outgoing data stream wizard: Configure NTRIP server (source)
Outgoing data stream wizard: Configure Serial port
Outgoing data stream wizard: Configure Radio
Outgoing data stream wizard: Configure GSM / Modem / CDMA - dial up
Outgoing data stream wizard: Summary
Configure a data stream step-by-step
•
Streamed data types - real time, LB2 (Leica Binary), NMEA or
BINEX
•
Message selection
•
Connection type and configuration
•
Activating the data stream
6: Context sensitive help
147