Leica GR10 Operational Manual page 343

Step Description
The SIM card is inserted into a slot on the side of the slot-in device.
Take the SIM card and a pen.
1 Using the pen, press the small button of the SIM card slot to eject the SIM card holder.
2 Take the SIM card holder out of the slot-in-device.
3 Place the SIM card into the SIM card holder, the chip facing up.
4 Insert the SIM card holder into the SIM card slot, the chip facing the connectors inside the slot.
LED indicators
Each slot-in-device for a radio or digital cellular phones has Light Emitting Diode indicators on the bottom side. They indicate
the basic device status.
IF the
Mode LED
Data transfer LED
Signal strength LED
on
SLR1-2 with Satelline
TA11
any device
SLG1-2 with Telit 3G,
SLG2-2 with Cinterion
MC75i
a. Mode LED, available for Satelline TA11
b. Signal strength LED
c. Data transfer LED
d. Power LED
is
red
off
flashing green
red
red: long flash,
long break
red: short flash,
long break
red: flashing red, long
break
11: External Devices
THEN
the device is in the programming
mode controlled from the PC via
cable.
data is not being transferred.
data is being transferred.
call is in progress.
no SIM card inserted, no PIN
entered or network search, user
authentication or network login in
progress.
logged onto network, no call in
progress.
GPRS PDP context activated.
341