Antenna Technical Data - Leica GR10 Operational Manual

GNSS Antennas Technical Data

Antenna Technical Data

Description and use
The antenna is selected for use based upon the application. The table gives a description and the intended use of the individual
antennas.
Type Description
AR25 Dorne & Margolin GPS, GLONASS,
Galileo, BeiDou antenna element with 3D
choke ring ground plane.
Optional protective radome.
AR20 GPS, GLONASS, Galileo, BeiDou, QZSS
reference station antenna with gold choke
ring ground plane. Optional protective
radome.
AT504GG Dorne & Margolin GPS, GLONASS L1/L2
antenna element with gold anodised
choke ring ground plane.
Complies with IGS type 'T' antenna, JPL
design. Optional protective radome.
AR10 GPS, GLONASS, Galileo, BeiDou
reference station antenna with large
ground plane and built-in radome.
AS10 Compact geodetic GPS, GLONASS,
Galileo antenna with built-in ground
plane.
Dimensions
Type AR25
Height 20.0 cm
Diameter 38.0 cm
Connector
AR25:
N female
AR20
N female
AT504GG: N female
AR10: TNC female
AS10:
TNC female
Mounting
Use
High end applications.
For example, monitoring tectonic plate
movements, first order control,
reference station.
High end applications, including all
reference station and monitoring.
Especially suited for Network RTK,
where excellent multipath rejection and
the best phase centre stability is
required.
High end applications.
For example, monitoring tectonic plate
movements, first order control,
reference station.
General use for standard and high
accuracy reference station and
monitoring applications.
Standard network RTK and monitoring
applications.
AT504GG AR10
14.0 cm 14.0 cm
38.0 cm 24.0 cm
AS10
6.2 cm
17.0 cm
13. Technical Data
359