Incoming data stream wizard: Configure TCP/IP client
Background Information
The TCP/IP client connection setting allows the receiver to act as a TCP/IP client and connect to a configured IP address and
port to receiver data.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP client page.
Setting
TCP/IP server address
TCP/IP port
Press
to go back to the previous wizard step. Press
Press
to cancel and return to GNSS management: Incoming data streams.
Description
Enter the numeric IP address or the hostname of the Server to connect to.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
Enter the TCP/IP port to connect to on the TCP/IP server to receiver data.
to continue to the next wizard step.
6: Context sensitive help
177