Network Connections: Wlan - Leica GR10 Operational Manual

Operational Manual (Online Help)

Network connections: WLAN

Background Information
Use WLAN configuration to configure the WLAN device on the receiver, allowing receiver configuration, data transfer and
communication with network devices.
Or use the internet sharing functionality to connect attached devices to the internet.
WLAN functionality can only be used on GR25 with the WLAN radio integrated and the GLR120 WLAN option
installed.
Setting Descriptions
The table below describes the settings that can be configured on the WLAN page.
Wireless radio
Enable/Disable
Field Descriptions
The table below describes the fields on the WLAN tab.
WLAN profiles
Name
SSID
Security type
RSSI/Signal strength
222
Description
Activate to power the WLAN radio on the receiver. If disabled, the GR25 WLAN radio canno
be used.
The WLAN radio is deactivated. Press to activate.
The WLAN radio is activated. Press to deactivate.
It is recommended to turn off the WLAN radio when not in use to
lower the power consumption of the receiver.
Description
The names as configured for the listed wireless profiles.
The Service set IDs of the listed wireless profiles.
The type of wireless security applied to the network the listed profiles are
connecting to.
Shown for all currently detected networks. The signal strength the wireless
signal is received with at the WLAN antenna. The displayed signal strength is an
interpretation (No signal, verly low, low, good, very good, excellent) of the RSSI
(receiver signal strength indication) value for each network. The RSSI values are
mapped as follows:
•
RSSI < -90 or WLAN network not seen at all => "No signal"
•
RSSI >= -90 and < -81 => "Very low"
•
RSSI >= -81 and < -71 => "Low"
•
RSSI >= -71 and < -67 => "Good"
•
RSSI >= -67 and < -57 => "Very good"