Leica GR10 Operational Manual page 218

Operational Manual (Online Help)
Backup communication
Enable
Restore default
values
Related topics
How to set up backup communication
Use a hostname to access an instrument with a static IP address
.
216
When the order of the default gateway priorities is changed,
an already established mobile internet connection will be re-
initialized.
Description
Enable the backup communication to back up your primary gateway (as
configured in the Priority list) with the secondary gateway.
When activated, the communication backup functionality will check regularly if the
data packages sent via the primary gateway reach their destination in the
network. If a certain percentage of data can not reach the destination, the
receiver will switch to using the backup communication line to send data. The
primary gateway is checked regularly to see if the communication is working
again reliably. If this is the case, a switch to the primary gateway is initiated.
If the backup communication is off and the primary gateway is
lost, the receiver may still be switching to the backup
communication but this switch may not work reliably. Also a
switch back from the backup communication line may not
work.
Press to fill the form with factory default settings.
The restore default button fills all fields with the default values
and stores these values. Pressing the save button is not
necessary. When accepting the confirmation message, all
settings on this page are overwritten with the default settings.