Incoming Data Stream Wizard: Connection - Leica GR10 Operational Manual

Incoming data stream wizard: Connection

Background Information
Data can be received by the receiver using a variety of communication types.
Setting Descriptions
The table below describes the settings that can be configured on the Connection page.
Setting
Connection type
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.
Description
Select the connection type.
TCP/IP server
TCP/IP client
NTRIP client
Serial port
The receiver works as a TCP server allowing TCP
clients to connect to the receiver's ports to transmit the
data streams to the GR/GM series receiver.
This setting allows the receiver to act as a TCP client
and connect to a configured IP address and port to
receive data.
This mode allows the receiver to act as an NTrip Client
and receive data from an Ntrip Caster. The receiver
initiates that connection to the Ntrip Caster and may
need to send authentication information.
A source table can be downloaded to allow selecting a
mount point to connect to.
The receiver receives data via the physical serial port.
to continue to the next wizard step.
6: Context sensitive help
175